Request a DemoLog In(877) 268-2511
Request a DemoLog In

—  6 min read

Top 8 Construction Health and Safety Hazards

By 

Last Updated Nov 29, 2023

Two construction workers wearing safety harnesses walk under scaffolding in a city.

In the construction industry, a lot can go wrong with the progress and completion of the structure itself. By the same token, many potential situations pose risks to the health and safety of your employees and others working on the jobsite. Hazardous conditions can have both short-term and long-term financial consequences along with the possibility of work-related illness or injury. 

Here's an overview of eight of the top safety and health hazards in construction – and preventive measures and resources contractors can use to mitigate these risks. 

Contents

Table of contents

1. Falls

It's no secret how dangerous — and unfortunately prevalent — falls are. Many of the accidents stem from oversights that could have been prevented with more vigilance on the job. You must be wary of these hazards and make prevention a part of your formal safety program. 

A government agency may require that holes in walking surfaces and skylight areas six feet or higher above a lower level must be protected by covers, guardrails or fall arrest systems. Guardrail installation also applies to stairs, runways and ramps situated six feet above a lower level. Establishing and enforcing these guidelines as part of your daily operations can significantly reduce the number of falls on the job. 

2. Getting caught in or between

Getting caught in a piece of machinery or caught between a piece of heavy equipment and the ground or a wall could result in the loss of life or limb. Clothing or jewellery can get tangled up in an unprotected pulley or conveyor system, while unguarded trenches pose risk for collapse and crushing injuries or suffocation. 

To reduce the risk of injury or death, contractors must train employees to be aware of heavy equipment during operation and refrain from wearing loose clothing or apparatuses attached to the body that can get caught up in moving machinery parts. Workers should also stay clear of the radius of operation for devices such as fans, drive belts or come-alongs, for example. 

3. Struck-by accidents

Head, neck or bodily injuries and death most often occur when workers use power tools, walk beneath elevated work areas and situate themselves near improperly stored building materials. 

Prevention and risk avoidance remain top priorities for your contracting business. Among the top safety measures implemented in your daily operations, you should ensure that all loads being moved are secured, caution employees to steer clear of suspended loads and overhead work, and strictly enforce the use of personal protective equipment (PPE), such as hard helmets and safety glasses. 

4. Electrocution

Powered-up equipment and electrical lines stand out as two principal risks on a jobsite. Inadvertent contact with exposed or hot wires or improper operation of energized machinery hold obvious peril for employees who have not undergone necessary safety training. 

According to CPWR, The Center for Construction Education and Training, electrical contractors account for about 32% of electrocution fatalities. The risk is highest for power line installers, who have the highest rate of electrocution death of any occupation.

Part of your formal safety program aimed at reducing burns or electrocution must require that workers wear clothing and PPE that includes boots, gloves, long-sleeved garments and face shields. Keeping a safe distance from power lines and marking areas where powered equipment is in use will also help minimize the risk for electrical accidents. You should also ensure that electrical equipment is adequately powered down and completely shut off. 

5. Manual material handling

AIHA cautions construction companies that moving building materials and equipment manually can lead to health complications. Pushing, pulling, holding and carrying construction items often places employees in awkward and unnatural positions that can cause musculoskeletal disorders (MSD).

These injuries often result in missed time or permanent incapacity. Financial distress can result from a lack of skilled labour and possible workers' compensation insurance claims. 

Some methods to avoid MSDs involve dropping materials as close as possible to where they'll be deployed or installed. Heavy loads should be transported by carts, dollies and lifting tables. Innovative tools that cut down on muscle strain and overexertion should replace less modern items. Analyze work processes to identify how efficiency and proper ergonomics can be optimized.

6. Noise

It's no secret that construction jobsites are noisy. But that noise can be more than a simple annoyance: High levels of noise exposure can cause permanent hearing loss. The impairment occurs gradually without an employee recognizing that damage is occurring. While other injuries can often be corrected, hearing loss is neither reversible nor curable. Thus, prevention becomes a key concern for your construction employees. 

Employees may be unaware of unsafe noise levels, so continual detection helps reduce the chance of hearing loss. If employees are exposed to noise above established limits, employers must provide personal protective equipment such as adequate ear protection.

If the time-weighted average (i.e. sound levels averaged over the work period) exceeds 85 A-weighted decibels, employers may be required to notify employees, monitor noise levels and implement a hearing conservation program, among other requirements.

7. Air contaminants

Construction workers are often exposed to fumes, vapours, gases, dust and other contaminants on the jobsite. These contaminants are inhaled through the mouth and nose, the most common routes of entry. Though less common, swallowing hazardous airborne particles must also be accounted for in safety protocols. 

One common contaminant, crystalline silica, is found in masonry and concrete products. Exposure to silica may result in a condition known as Silicosis, which can lead to respiratory disease and even death.

PPE becomes an integral part of how contractors manage the risk of air contamination. Masks and respirators must be used where contaminants come into play. Monitoring constantly changing unsafe levels of contaminants helps drive new safety protocols while adequate ventilation in closed spaces also helps lessen the chance that employee health issues can arise.

Planning for contaminants allows you to provide employees with the appropriate barriers to possible illnesses and injuries. 

8. High temperatures

Construction work in hot climates can have severe health implications when overexposure factors into the equation. Heat stroke is one of the most common conditions that you must prevent when working in extreme temperatures.

Dangerously, heat stroke is often difficult to diagnose. Afflicted workers are typically suffering from impaired judgment and have trouble describing their symptoms. Contractors should create a plan for recognizing and treating symptoms when work is done in full sun and the heat index rises.

The true cost of health & safety hazards

Besides the obvious humane angle, there are many financial risks that come with health and safety hazards on the job.

Lost days at work can impact the scheduled timeline and projected profitability of a job. Skilled labour will be more difficult to come by if your company has a track record of unhealthy and unsafe business practices. Higher volumes of workers' compensation claims will cause policy premiums to skyrocket, adding yet another unwanted expense to your operations. 

And while the timely completion of a project is critical, nothing holds more importance than the safety and well-being of your employees.

Categories:

Tags:

Written by

Harshil Gupta

27 articles

Harshil is a Product Marketing Manager at Procore with a focus on General Contractors. Backed by a stint in engineering and rich experience in growth and product marketing, he's enthusiastic about the role of technology in elevating and enabling other industries. He lives in Toronto.

View profile

Explore more helpful resources

article-image

The 5 Key Types of Construction Contracts

There are five common types of construction contracts: lump sum (or fixed price), time and materials (T&M), unit price, guaranteed maximum price (GMP) and cost-plus. Each of these contract types...

article-image

Guide to Guaranteed Maximum Price (GMP) Contracts in Construction

How GMP contracts work A GMP contract is a contractual agreement between a contractor and project owner that sets a maximum cost for the construction work of a project. In...

article-image

The Construction Tendering & Bidding Process Explained

Mastering the tendering process is essential for general contractors and subcontractors alike. Across the industry, a hit ratio of around 5:1 is generally considered successful — meaning that for every...

article-image

Introduction to Construction Accounting

Construction companies have to make difficult choices among many financial alternatives, like tendering on one project over another, selecting financing for materials or equipment or setting a project’s profit margin....

Procore is committed to advancing the construction industry by improving the lives of people working in construction, driving technology innovation, and building a global community of groundbreakers. Our connected global construction platform unites all stakeholders on a project with unlimited access to support and a business model designed for the construction industry.

LinkedIn Icon
LinkedIn
Facebook icon
Facebook
Twitter icon
Twitter
Instagram Icon
Instagram
YouTube icon
YouTube

Call us at (877) 268-2511 to speak with a product expert.

Apple LogoApple App StoreGoogle Play logoGoogle Play

Downloads

Apple LogoApple App StoreGoogle Play logoGoogle Play
  • Privacy Notice
  • Terms of Service

© 2024 Procore Technologies, Inc.